Limbus lens model TLS04NI-5050-30

Description

Limbus lens model TLS04NI-5050-30

• Please use a water base and soft cloth (paper with air) to clean the Limbus lens model TLS04NI-5050-30 and reflector if necessary.
• Prohibit the use of industrial solvents such as alcohol to clean the lens.
• The operating temperature is -25ºC ~ +80ºC.
• The storage environment temperature is 0ºC ~ 40ºC, humidity is 30% to 95%. The optical lens has the function of changing the light beam.
• Protect the product from sunlight and other ultraviolet rays, as it will cause aging, discoloration, cracking, etc.
• Please wear gloves after installing the lens, avoid abrasion of the lens surface.
• Avoid using acidic or alkaline solution in contact with the product, avoid causing chemical reactions

• When installing or moving the lens, be careful not to apply pressure to its surface.
• Install the lens according to the manufacturer’s instructions.
• Avoid installing the lens in locations subject to excessive temperatures or near sources of extreme heat.
• Periodically inspect the lens for scratches or other damage.
• Use replacement parts if there are any scratches or defects.
• Use a cover or UV filter for protection if the lens is exposed to direct sunlight.
• Avoid exposing the lens to strong laser beams that may damage its surface.
• Avoid rapid temperature changes (such as going from very cold to very hot environments), as this may cause the lens to crack.
• If the lens has a mount or retaining parts, inspect these parts periodically and replace them if necessary to prevent damage to the lens.
• Make sure the lens is compatible with your other optical and electrical components or systems to avoid excessive stress.
• Always read the manufacturer’s instructions and ensure that storage and usage conditions meet recommended standards.