فارسی
English
العربية
Have you ever seen hose strings? Have you used them? If your answer is yes, then this question has probably come to your mind: What causes hose strings to burn? Hose strings are one of the various models of decorative and practical lights that are made in the form of flexible and transparent tubes and LED lamps or energy-saving lamps are used inside them. These types of strings are used in various environments such as homes, workplaces, celebrations, and public spaces due to their flexible design, easy installation, and low energy consumption.
An important feature of hose strings is their resistance to weather conditions, which makes them suitable for outdoor and indoor use. In addition, these strings are available in a variety of colors and designs that create attractive and special lighting effects.
Common Causes of Hose String Burning and Prevention
To answer the question of what causes hose string burning, we need to examine the factors that can contribute to string burning. Here are some common causes and ways to prevent it:
Voltage Fluctuations: Sudden changes in voltage can damage the internal circuitry of the string.
Poor Connections or Improper Installation: If connectors or wires are not connected properly, electrical current is transferred incorrectly, causing heat to build up and the string to burn.
Excessive Heat: Placing the string in hot environments or near heat sources can cause parts of the string to melt.
Poor Product Quality: Using inferior and cheap strings usually reduces the lifespan and increases the likelihood of burning.
Moisture Ingress: Water or moisture entering the string circuits can cause a short circuit and burn it.
Prevention:
To prevent hose reels from burning, pay attention to the following points:
Using a surge protector: Use a surge protector to prevent power fluctuations.
Proper installation and use of high-quality connectors: Make sure that the connections are made correctly and use standard connectors.
Proper ventilation: Install the reels in well-ventilated environments to prevent overheating.
Choosing high-quality products: Use reputable brands and high-quality products to avoid problems caused by poor quality.
Protection against moisture: Install the reels in dry environments and use waterproof models if used outdoors.
The role of power fluctuations in the failure and burning of LED strings
One of the most important and common causes of failure and burning of hose strings is power fluctuations because these strings are very sensitive and vulnerable to unstable current. To prevent this from happening, you should be careful about voltage drops and increases. Power fluctuations reduce the life of electrical appliances. Pay attention to the following points:
Voltage increase: When the input voltage is higher than the designed limit for the LED string, it causes excessive heat in the internal circuits. This can lead to the destruction of LED chips or rectifier circuits (drivers) and greatly reduce the life of the string.
Voltage decrease: A voltage decrease causes the LEDs to not light up completely or not to work properly. This not only reduces the quality of lighting, but also puts pressure on the string drivers in the long run and may cause failure.
Frequent power outages: When the power is repeatedly turned on and off, a sudden surge of electricity enters the circuit. These electrical shocks can cause serious damage to sensitive internal components and even cause the filament to burn out completely.
Inrush current: When the filament is turned on during voltage fluctuations, a very strong inrush current enters the circuits. This current can damage the driver circuits or the LEDs themselves.
Poor power quality: In areas where the power quality of the network is poor and intermittent fluctuations occur, the possibility of damage to electronic equipment such as LED filaments increases.
How to ensure the useful life of LED filaments?
Now that you understand what causes filament filaments to burn out? In order for filament filaments to last longer and have a longer life, you must prevent their premature failure. This is only possible by observing the following points:
Choosing a quality product: Use LED strings that are manufactured by reputable brands and have standard certificates. High-quality products usually have better raw materials and more advanced circuits.
Using a proper power supply: Make sure that the power supply properly supplies the voltage and amperage required by the string. The power supply should be stable and without fluctuations.
Install a surge protector: Use a surge protector to prevent sudden power fluctuations that damage LED circuits.
Installation in a suitable environment:
Avoid placing the strings in a humid environment and near water if they are not waterproof.
Installation in well-ventilated environments can prevent the string from overheating.
Avoid continuous and long-term lighting: Although LEDs are low-power, continuous and uninterrupted use may shorten their lifespan. It is better to use a timer to adjust the lighting duration.
Correct and safe installation: Connections and wiring must be done correctly to prevent any looseness or short circuit.
Basic cleaning: Remove dust and dirt on the surface of the string gently without damaging the parts to maintain optimal lighting performance.
Avoid heat sources: Avoid installing strings near heat sources such as heaters, stoves, or direct sunlight.
The best brands of hose reels that are resistant to damage
Reputable and reputable companies have proven the quality of their products, and you can safely use these brands and preserve your investment for a longer time.
International brands:
Philips: One of the most reputable global brands with high quality and long lifespan.
Lighting EVER: A Chinese brand known for its durable and cost-effective products.
TORCHSTAR: A provider of hose reels with modern design and high resistance.
Omika: Famous for its innovation in the design and quality of decorative lighting products.
WYZworks: A brand that is popular for its reasonable price and high quality.
Iranian brand:
Shamim Andisheh: This domestic brand has a good position in the Iranian market by providing high-quality and cost-effective products. Shamim Andisheh also works in the field of producing and implementing professional lighting projects, and its products are suitable for both home and commercial use.
Shamim Andisheh is creative and innovative in lighting equipment
Shamim Andisheh is a leading lighting company in the field of designing and manufacturing lighting equipment, which produces a variety of lighting products, including LED hose strings. This brand has been able to find a good position in the Iranian market due to its high-quality and affordable products.
Shamim Andisheh products are usually suitable for home and commercial use and have been noted for their reasonable price and high durability.
How to contact Shamim Andisheh
Phone: 12-44071011 (021)
Email: shamim@shamimco.com
Website: www.shamimco.com
Social Media: Contact us at 09394121002
